Accu-Steam Drop-In Electric Griddle - 240V - 24

Short Specification
Griddle shall be an AccuTemp Model EG modular drop-in electric heated unit, with hermetically sealed vacuum chamber that produces steam to heat the 8-gauge stainless steel griddle plate. Efficient steam heat transfer provides 200400F (93204C) operating temperature range and uniform griddle surface temperatures of 2F (1C). Unit is fabricated in two modules with water and grease resistant front control panel and insulated and sealed griddle cook surface drop-in, fabricated from cold-rolled stainless steel recessed 1.5" below work surface, with 3" wide by 1.25" deep full front grease trough and 1.5-gallon grease drawer. Unit is NSF and U.L. listed and manufactured in the U.S.A.

Construction Features

• All stainless griddle module insulated and sealed for easy installation in new or existing cabinet or work station
• 8 gauge cold-rolled and annealed stainless steel griddle plate recessed a full 1.5"
• 3" wide by 1.25" deep full front grease trough
• 2" x 4" drop chute to 1.5-gallon capacity grease drawer inside enclosed compartment
• Sealed control panel provided for cabinet front mounting

Performance Features

• Hermetically-sealed steam/vacuum chamber mounted to and below griddle cooking surface
• 14.25-kW power input, with long-life low watt density heating elements mounted inside vacuum chamber and immersed in chemically pure water. (Water never needs replacement)
• Steam transfers heat evenly to cooking surface with only 2F (1C) in temperature variation
• Rapid surface temperature recovery (10 seconds or less) allows turning product to same spot when grilling
• Smooth cold-rolled stainless steel griddle surface speeds and simplifies cleaning
• 1.5" recessed cook surface reduces splatter and cleanup of surrounding work surface

Standard Control Features

• Modular sealed control panel reduces grease infiltration and chance of flare-ups
• Power-On switch & indicator light
• Heating indicator light
• 200400F (93204C) solid state thermostat Never needs calibration
• Easy front service access to all controls